OEM Xentry Diagnosis VCI C6 OEM Original for W223 W206

The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4. It’s an OEM dealer of the current generation, and is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. The NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor: easy and convenient, without built-in PCs and hard drives inside, no fans, battery, and display. Note: the OEM Xentry Diagnosis VCI is 2nd hand-used condition but original OEM which will work with the OEM Xentry Diagnosis 12/2022 on W223 W206 W213FL and W167 2022 models and work with OEM SCN online programming and coding for the new models.

VCI C6 Package Include

1. OEM Xentry VCI C6 Original Used 1pc
2. Bosch OBD2 connection cable brand new (part no. 1699200366) 1pc
3. Bosch USB connection cable brand new 1pc

We will also possibly support global customers with the below OEM Xentry service:

• 12.2022 Xentry Diagnostic System Install with SSD system ready to work or remote installation of Xentry 12/2022
• 12.2022 Xentry Diagnosis system patches for W223 W206 W167 W213FL if you already have the 12.2022 ready to work
• OEM SCN coding online remotely for OEM 2022 models or DTS9 coding programming remotely
  (MUST have this original Xentry VCI which supports DOIP protocols for 2021-2023 models if you have )

OEM Remote Support

Product advantages

• The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
• No more diagnosis updates are required – only firmware updates on rare occasions
• Can be used for all model series
• Does not require an adapter for an external power supply

XENTRY Diagnosis VCI technical data

Feature
Network connection
Cabled	USB 2.0
WiFi stick	802.11b/g/n
Processor system
Microprocessor	Intel MX6 Solo
RAM	RAM: 512 MB DDR3 RAM
ROM	512 MB flash
User interface
LEDs	5 status LEDs
Power supply*
From the vehicle battery via the diagnosis connection cable or via a connected USB cable.	8 V to 28 V
Certifications
VCI	FCC, CE, RoHS

For more details about the OEM Xentry Diagnosis dealer package

XENTRY Diagnosis Kit 4 consists, as usual, of two components:

The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3. XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3. Easier to use The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits. XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port Located on the front side are two buttons that you can configure individually using ConfigAssist To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued. Much faster XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz) The main memory has 16 GB DDR4 1 TB SSD hard drive (with 3000 MB/s read and write speed) More convenient The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card. XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan. XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.