OEM W223 W206 SCN Coding Remote Support One ECU

For the OEM W223 W206 W167 W213FL SCN Coding Online with OEM XENTRY Diagnosis VCI C6 Original is a MUST to have before we start, also fast smooth internet speed is necessary for the SCN coding remote support.

The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4. It’s an OEM dealer of the current generation, and is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. The NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor: easy and convenient, without built-in PCs and hard drives inside, no fans, battery, and display Note: the OEM Xentry Diagnosis VCI is 2nd hand used condition but the original OEM which will work with the OEM Xentry Diagnosis 12/2021 on W223 W206 W213FL and W167 2022 models and work with OEM SCN online programming and coding for the new models.

Product advantages

• The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
• No more diagnosis updates are required – only firmware updates on rare occasions
• Can be used for all model series
• Does not require an adapter for an external power supply

Feature
Network connection
Cabled	USB 2.0
WiFi stick	802.11b/g/n
Processor system
Microprocessor	Intel MX6 Solo
RAM	RAM: 512 MB DDR3 RAM
ROM	512 MB flash
User interface
LEDs	5 status LEDs
Power supply*
From the vehicle battery via the diagnosis connection cable or via a connected USB cable.	8 V to 28 V
Certifications
VCI	FCC, CE, RoHS

For more details about the OEM Xentry Diagnosis dealer package

XENTRY Diagnosis Kit 4 consists, as usual, of two components: XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI. The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3. XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3. Easier to use The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits. XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port Located on the front side are two buttons that you can configure individually using ConfigAssist To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued. Much faster XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz) The main memory has 16 GB DDR4 1 TB SSD hard drive (with 3000 MB/s read and write speed) More convenient The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card. XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan. XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.