For BMW, Tech Support

BMW VO code coding programming

Posted on by autosvscom

Coding programming bmw vo car configuration codesHow to program with BMW E-sys

BMW E-sys change vo code

  1. Connect to BMW car;
  2. Read FA,read ecu and Calculate ecu version.(Calculate will take 10 minutes)
  3. Select SVT (calculated)
  4. Select the ecu to be programmed, check the program file, and click Start to program;(will take 10 minutes or more)
  5. Program finished;
  6. After programming ecu, you still need to ecu code;
  7. Code finished,ecu programming complete.
  8. (Tips :If the ecu still does not work, you need to use the BMW ISTA diagnostic software to check the fault and check whether the ecu needs to be matched or learned.)

Leave a Reply